BE218-4-UN-ET ELT Electronic 2 X 18w T8 110-260v 50 60 Online now
- Estimated Delivery : Up to 4 business days
- Free Shipping & Returns : On all orders over $200
Obsolete, If using with water treatment lamps please consider the below as a viable alternative.
ELT Electronic Ballast 110-260v -50 60 0hz to run 2 x 18w T8 tubes – ELT – BE218UN-4
Product Details
100V to 260V Electronic Ballasts for T8 Fluorescent Tubes
Class I built-in multi-voltage ballasts for T8 tubes. Versatile multi-voltage capability (100 to 260V) therefore also suitable for 110V site lighting applications.
Ignition with pre-heating in cathodes for long lamp life without flashes and flickering
Constant total power and stabilised luminous flux
High frequency operation
High energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires without screening to earth in the lamps
Over voltage protection 350Vac (2 hours)
Rapid conncetor with fixing spring. Circular conductor section: 0.5 – 1.5 mm²
2 x 15 18w hf 110-260v ballast
Product Code: BE 218-4-UN
Description
• Electronic Ballasts for T8 TC-DD Fluorescent Lamps with Universal Voltage 110 – 260V • Class 1 ballast for built-in use • Can be used for lighting equipment in protection Class l and ll • Push in connector with retaining springs. Connector cross section 0.5 – 1.5 mm2 • IDC connections available upon request • Ignition with pre-heating in cathodes for longer lamp life without flashes or flickering
Specification
Performance
Switching HF
Lamp
T8 450 mm
Cap
T8
Type
No off
Power (W)
1 2x15W
Length (mm)
230
Width (mm)
40
Height (mm)
28
Type1
HF
Title
Default Title
Related products
-
-
-
-
-
Review Cart
BE218-4-UN-ET ELT Electronic 2 X 18w T8 110-260v 50 60 Online now $24.53Select optionsBE218-4-UN-ET ELT Electronic 2 X 18w T8 110-260v 50 60 Online now $24.53Select options
100V to 260V Electronic Ballasts for T8 Fluorescent Tubes
Class I built-in multi-voltage ballasts for T8 tubes. Versatile multi-voltage capability (100 to 260V) therefore also suitable for 110V site lighting applications.
Ignition with pre-heating in cathodes for long lamp life without flashes and flickering
Constant total power and stabilised luminous flux
High frequency operation
High energy efficiency
Corrected stroboscopic effect
Allows the use of Class I and Class II luminaires without screening to earth in the lamps
Over voltage protection 350Vac (2 hours)
Rapid conncetor with fixing spring. Circular conductor section: 0.5 – 1.5 mm²
2 x 15 18w hf 110-260v ballast
Product Code: BE 218-4-UN
• Electronic Ballasts for T8 TC-DD Fluorescent Lamps with Universal Voltage 110 – 260V • Class 1 ballast for built-in use • Can be used for lighting equipment in protection Class l and ll • Push in connector with retaining springs. Connector cross section 0.5 – 1.5 mm2 • IDC connections available upon request • Ignition with pre-heating in cathodes for longer lamp life without flashes or flickering
| Title | Default Title |
|---|
Related products
Review Cart
BE218-4-UN-ET ELT Electronic 2 X 18w T8 110-260v 50 60 Online nowBE218-4-UN-ET ELT Electronic 2 X 18w T8 110-260v 50 60 Online now