FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 225–240 of 242 results
PWM-60-DA2 Series Features: PWM-60 DALI 2 series is a DALI Dimmable LED AC DC LED driver featuring the constant voltage mode with PWM style output, which is able to maintain the brightness homogeneity when driving all kinds of LED strips. Fully compatible with both DALI2 and DALI. Features: Constant voltage PWM style output Emergency lighting…
 SLIM 13W 24V HPFU (857 kb)  Photo (191 kb) Dimming: NOT DIMMABLE Additional technical features: RIPPLE FREE SELV <> WIDE RANGE INPUT VOLTAGE Approvals: ENEC UL (class 2) CE EAC UKCA Plastic case: Slim IP 20 (Independent Use) Minimum cut-out hole diameter: 32 mm Size: 158 x 19 x 22 mm
OBSOLETE REPLACED by https: www.easy-controlgear.com products dc-maxi-jolly-hc-dali-bi-123417?_pos=1&_sid=78ed243f7&_ss=r  This is a TCI 55w 1050mA MaxiJolly Dali dimmable constant current LED driver. The full features list is as follows: •Multipower driver supplied with dip-switch for the selection of the output current. •IP20 independent driver, for indoor use (DC MAXI JOLLY HC 2 DALI). •Class I protection…
The Tridonic I-SELECT 2 PLUG 250MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 Plug 275mA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 PLUG 300MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 PLUG 325MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 PLUG 400MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 PLUG 500MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 PLUG 600MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 PLUG 700MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
The Tridonic I-SELECT 2 PLUG 850MA BL plug is a ready-to-use resistor to set output current value. This is compatible with LED drivers featuring I-Select 2 interface and is not suitable for use with first generation I-Select interface. The resistor is based isolated, has a resistor power of 0.25w and is suitable for use with…
Obsolete replaced by 28002497, this what you will be sent . if you know what Ma you are using you may need to order the relevant resistor . The Tridonic LCI 42w 900mA TEC SR LED driver is a fixed output, constant current LED driver with a maximum output power of 42w. These drivers have…
ComfortLine LED Drivers – with Selectable Current Product features • Linear casing shape Functions • The required current output can be chosen by selecting the respective pin at the output terminal. Electrical features • Mains voltage: 220–240 V ±10% (allowed voltage range: 198–264 V) • Mains frequency: 50–60 Hz • Push-in terminals: 0.2–1.5 mm² •…
Please note this item is a special and not stock delivery can be up to 2 weeks  Product leaflet pdf 341.1 kB
Specifications 929002101206 General information Protection class IEC Safety class I II Operating and electrical Output Current Ripple (Max) 4 % Output Current (Max) 1050 mA Open Circuit Voltage (DC) (Max) 60 V Output Power (Max) 36 W Output Power (Min) 11 W Output Current (Min) 300 mA Output Voltage (Max) 54 V Output Voltage (Min)…
End of content
End of content
No products in the cart.
